As the world ramps up its self-protection measures against coronavirus, we have all seen the advice for washing our hands for 20 seconds (and various playlists for what songs to sing so you know you’ve reached the full 20 seconds), but there are also important considerations when it comes to keeping your living spaces free of coronavirus germs.
As more information about the coronavirus pandemic develops, some of the information in this story may have changed since it was last updated. For the most up-to-date information on COVID-19, please visit the online resources provided by the CDC, WHO, and your local public health department.
Killing germs on household surfaces is nothing new. You’re probably already doing it when you routinely clean the bathroom and after you handle raw meat or chicken in the kitchen. But with this current outbreak of the Novel Coronavirus (COVID-19), keeping all frequently-touched household surfaces, like faucet handles, phones, and remote controls, germ-free is more top-of-mind than ever.
It’s important to know that not all cleaning products that claim to disinfect are equally effective on all types of germs. There are many types of bacteria and viruses and not every product kills them all. Below, we list which products specifically work on the coronavirus, how to properly use them for maximum effectiveness — and which to avoid.
The U.S. Environmental Protection Agency (EPA) has compiled a list of products that while not specifically tested on the brand-new version of the virus that causes COVID-19 just yet, have been proven effective on similar or harder-to-kill viruses, such as the rhinovirus that causes the common cold; they expect them to work on the coronavirus, too. These products use a variety of different ingredients and formulations, so be sure to use them exactly as the label directs.
These products include:
According to the CDC, hydrogen peroxide is a stable and effective disinfectant against viruses when used on hard, non-porous surfaces. Typically sold in 3% solutions, hydrogen peroxide can be used as is, directly from the bottle. It’s best to keep it away from fabrics when cleaning and to wear gloves to protect your hands.
To use: Spray or wipe it on the surface, allowing it to remain wet for at least one minute before wiping.
Isopropyl alcohol is an effective disinfectant against many pathogens, including coronavirus, as long as the concentration is 70%. Most rubbing alcohols are 70% isopropyl alcohol, but concentrations can range from 60-99%. For killing coronavirus quickly on surfaces, 70% is best — pure (100%) alcohol evaporates too quickly to be effective.
To use: Wipe or spray the surface with the alcohol and make sure it remains wet for at least 30 seconds.
No. According to the CDC and NSF (a public health and safety organization), vinegar (or vinegar-based alternative cleaning products) should not be used to disinfect or sanitize. Vinegar-containing cleaning products can be a good in some instances, but vinegar is not registered with the EPA as a disinfectant and is ineffective against most bacteria and viruses – it does not kill the flu or coronavirus. Undiluted white vinegar may work on some limited types of bacteria, but it’s not the best way to get surfaces germ-free. (Besides, coronavirus is a virus, not a bacteria.)
Before using any disinfecting product, start by reading the label to make sure it is registered with the EPA and to see what strains of bacteria and viruses it kills. The EPA registration number can usually be found in small type on the bottom of the front or back label, and the bacteria and viruses the product is effective against are also usually listed.
EPA registration is required by law for any cleaner that claims to kill germs. It’s what we rely on in the Good Housekeeping Cleaning Lab when we evaluate sanitizing and disinfecting products and it assures you that if you follow the directions, the product will work as claimed.
A few more points:
According the the U.S. Center for Disease Control (CDC), an easy way to disinfect hard, non-porous surfaces with a product you likely have at home is to combine 1/3 cup of regular chlorine bleach (sodium hypochlorite) bleach per gallon of water. (Clorox recommends using 1/2 cup bleach per 1/2 gallon.) For small batches, use 4 teaspoons of regular chlorine bleach and 1 quart of water.
To use: Wearing gloves, dip a cloth into the mixture, wipe the surface, allowing the solution to contact the surface for five minutes and air dry. For food contact surfaces, like countertops and high chair trays, rinse with warm water and air dry after disinfecting. Be careful not to splash the bleach solution on your clothes or in your eyes and use it sparingly on stainless steel sinks and surfaces.